Strimmer / Brush Cutter Pre-Use Checklist STRIMMER PRE-USE CHECKLIST Date * Name * Name First First Last Last Make / Model Number of Strimmer * Fleet Number / Serial Number * All Checks to be undertaken each day before use * Locate and ensure you are familiar with all machine operations and controls. Check for loose/missing nuts, bolts and screws. Tighten and/or replace as needed Inspect fuel lines, tank and area around carburetor for fuel leaks. Do not operate if leaks are found. Inspect All Components To Ensure They Are Attached Securely Engine Oil or Fuel leakage (Look For Fresh Stains on Cap / Hose Connections & Ground) Check Sparkplug Boot is Secure, A Loose Boot may cause Arcing & Could Ignite Combustable Fuel and Cause a Fire Ensure all guards are fitted, secure and functional. Do not operate if guards are missing or faulty. Ensure the blade unit has a debris shield, either a bar handle or a U-handle, and is suspended from a shoulder harness. Controls & Safety Devices are Operational & Not Modified in Any Way Handles Are Clean & Dry (For Safe Control) Select the correct cutting tool for the task. Refer to manufacturer’s recommendations. Load the nylon line cutting head only with nylon trimmer line of the proper diameter. Thoroughly inspect blades for damage and cracks. When operating the unit with a blade, ensure the blade is attached to the unit as designed (for example, with a locknut and cotter pin) and with the teeth pointing in the direction the blade head rotates Comments Pass / Fail * Pass Fail I Confirm that I have Carried Out ALL Checks * signature keyboard Clear If you are human, leave this field blank. Submit Start Over
